3D Systems Cubify CUBEX Duo Manual - Page 7

Browse online or download pdf Manual for 3D Printers 3D Systems Cubify CUBEX Duo. 3D Systems Cubify CUBEX Duo 10 pages. Replacing a main board pcb
Also for 3D Systems Cubify CUBEX Duo: Replacement Manual (13 pages), Replacement Manual (17 pages), Manual (10 pages)

Print Page

Using the 2.5mm hex driver, undo the bolts holding the Print Jet driver boards to the

Main Board PCB and remove the Print Jet driver boards. (Note the amount of Print

Jet driver boards will correspond with the amount of Print Jets present on your

CubeX printer)

Fitting the new Main Board PCB

Plug the Extruder Driver boards into the new Main Board PCB and fasten with bolts.