3D Systems Cubify CUBEX Duo Manuel - Sayfa 7

3D Yazıcılar 3D Systems Cubify CUBEX Duo için çevrimiçi göz atın veya pdf Manuel indirin. 3D Systems Cubify CUBEX Duo 10 sayfaları. Replacing a main board pcb
Ayrıca 3D Systems Cubify CUBEX Duo için: Değiştirme Kılavuzu (13 sayfalar), Değiştirme Kılavuzu (17 sayfalar), Manuel (10 sayfalar)

Sayfayı Yazdır
3D Systems Cubify CUBEX Duo Manuel
Using the 2.5mm hex driver, undo the bolts holding the Print Jet driver boards to the
Main Board PCB and remove the Print Jet driver boards. (Note the amount of Print
Jet driver boards will correspond with the amount of Print Jets present on your
CubeX printer)

Fitting the new Main Board PCB

Plug the Extruder Driver boards into the new Main Board PCB and fasten with bolts.
7