3D Systems Cubify CUBEX Duo Handmatig - Pagina 7

Blader online of download pdf Handmatig voor {categorie_naam} 3D Systems Cubify CUBEX Duo. 3D Systems Cubify CUBEX Duo 10 pagina's. Replacing a main board pcb
Ook voor 3D Systems Cubify CUBEX Duo: Vervangingshandleiding (13 pagina's), Vervangingshandleiding (17 pagina's), Handmatig (10 pagina's)

Pagina afdrukken

Using the 2.5mm hex driver, undo the bolts holding the Print Jet driver boards to the

Main Board PCB and remove the Print Jet driver boards. (Note the amount of Print

Jet driver boards will correspond with the amount of Print Jets present on your

CubeX printer)

Fitting the new Main Board PCB

Plug the Extruder Driver boards into the new Main Board PCB and fasten with bolts.