3d-printz Mini Sinbad 1200 Manual - Page 3

Browse online or download pdf Manual for Toy 3d-printz Mini Sinbad 1200. 3d-printz Mini Sinbad 1200 6 pages.

3d-printz Mini Sinbad 1200 Manual
Assembling
seated, the Bowden cable tubes will help you and act as guide rails. But be careful not to
glue the bowdens to the fuselage parts, they should remain freely movable! Use some
activator to get a strong adhesive bond!
First check whether all parts according to
the list above are present and intact. If
necessary, sand off residues with
sandpaper and also roughen the adhesive
surfaces a little. The rudder hinges are still
a bit stiff due to production - move them
back and forth until they run smoothly, if
necessary sand them, but be careful! The
best way to assemble the fuselage is to
use the Bowden cable sleeves as guide
rails. Join Fus2, Fus3 and Fus4 in this way
and glue the parts over a large area with
medium-viscosity superglue! Make sure
that the individual parts are correctly