Altman GALLERY SERIES Quick Start Manual - Page 14

Browse online or download pdf Quick Start Manual for Lighting Equipment Altman GALLERY SERIES. Altman GALLERY SERIES 20 pages.

Print Page

Gallery Series

Terminal Block (Phoenix Connector) Wiring

• All pin information is read from left to right from the back of the connector (looking at wiring inlet).

• (DMX Version Ceiling mount) One (1) piece of Category 5 Belden 1592A cable for all data connec-

tivity. Three (3) of the conductors are used for data input and three (3) conductors for data output.

Note, the White/Blue & Blue conductors are not used. Both Data Input and Output utilize a Phoenix

Contact 3 position terminal block for use with 20-24 AWG.

DMX Output Wiring

Factory (Fixture) Wiring

Part # 51-1709459

(DMX Out -)- Pin 3 - Green

(DMX Out +) - Pin 2 - White / Green

(Common) - Pin 1 - Brown

(Common) - Pin 1 - White / Brown

(DMX In +) - Pin 2 - White / Orange

(DMX In -) - Pin 3 - Orange

DMX

Connection

White / Brown

DMX Input

White / Orange

DMX Output

White / Green

Page 14

Wire Color

Signal

Common

Data In (+)

Orange

Data In (-)

Green

Data Out (-)

Data Out (+)

Brown

Common

Customer (Building) Wiring

Part # 51-1709451

DMX Input Wiring

Figure 13: DMX Wiring

Factory

Connection

Wired

Pin 1 (Left)

Male

Pin 2 (Center)

Pin 3 (Right)

Pin 1 (Left)

Female

Pin 2 (Center)

Pin 3 (Right)

Quick Start Guide

(Common) - Pin 3

(DMX Out +) - Pin 2

(DMX Out -)- Pin 1

(DMX In -) - Pin 1

(DMX In +) - Pin 2

(Common) - Pin 3

Customer (Building) Wiring

Part # 51-1709459

Factory (Fixture) Wiring

Part # 51-1709451

Customer

Connection

Pin 3 (Right)

Female

Pin 2 (Center)

Pin 1 (Left)

Pin 3 (Right)

Male

Pin 2 (Center)

Pin 1 (Left)