Altman GALLERY SERIES Quick Start Manual - Page 12
Browse online or download pdf Quick Start Manual for Lighting Equipment Altman GALLERY SERIES. Altman GALLERY SERIES 20 pages.
Print PageGallery Series
Canopy / Pendant Mount Models
IMPORTANT! Ceiling junction box and junction box screws are not included with Gallery Series
LED Luminaires and are by others.
WARNING! Canopy / pendant mount models must be installed by qualified professional installer
and should be done in accordance with local and national codes.
WARNING! Make sure power to the junction box is completely disconnected. Failure to do so
could lead to serious injury or death.
To wire and install canopy / pendant mounted models:
Step 1. Install Gallery Series LED Luminaires Mounting Flange to ceiling junction box. Ceiling junction box
is octagon-style box (by others). Mounting hole spacing is 3.5-inches (88.9 mm).
Step 2. Connect wiring to fixture. Refer to
(Sink Current)"
Step 3. Align fixture bottom mounting flange with top mounting flange screws.
Step 4. Turn clockwise securing the unit to top mounting flange.
Step 5. Tighten flange screws.
Page 12
"Connecting Power" on page 8
on page 14 as applicable
Top Mounting Flange
(Mounts to Junction Box)
Flange Screw (x2)
Figure 11: Canopy / Pendant Mount
or
"0-10V Controlled Models
3.5IN / 88.9 MM
Bottom Mounting Flange
Quick Start Guide