3DUpFitters Ender 3 V2/CR-6 Enclosure Kit Installation Manual - Page 9

Browse online or download pdf Installation Manual for 3D Printers 3DUpFitters Ender 3 V2/CR-6 Enclosure Kit. 3DUpFitters Ender 3 V2/CR-6 Enclosure Kit 16 pages.
Also for 3DUpFitters Ender 3 V2/CR-6 Enclosure Kit: Installation Manual (15 pages)

Print Page
Confirm the direction of the fan by plugging it into
a USB power supply before attaching the filter.
The round label should be on the outside
The fan should be attached on the outside of
the enclosure.
The fan should be oriented to pull air OUT of
the enclosure.
Use the long screws included in the fan packet to
attach the fan. The length of the screws may
change depending on the depth of this particular
shipment of fans.
Copyright 2021 3DUpfitters
9