3DUpFitters Ender 3 V2/CR-6 Enclosure Kit Installatiehandleiding - Pagina 9

Blader online of download pdf Installatiehandleiding voor {categorie_naam} 3DUpFitters Ender 3 V2/CR-6 Enclosure Kit. 3DUpFitters Ender 3 V2/CR-6 Enclosure Kit 16 pagina's.
Ook voor 3DUpFitters Ender 3 V2/CR-6 Enclosure Kit: Installatiehandleiding (15 pagina's)

Pagina afdrukken
Confirm the direction of the fan by plugging it into
a USB power supply before attaching the filter.
The round label should be on the outside
The fan should be attached on the outside of
the enclosure.
The fan should be oriented to pull air OUT of
the enclosure.
Use the long screws included in the fan packet to
attach the fan. The length of the screws may
change depending on the depth of this particular
shipment of fans.
Copyright 2021 3DUpfitters
9