ESI KATA2-MS-DC-BLK Installation Instructions Manual - Page 2
Browse online or download pdf Installation Instructions Manual for Racks & Stands ESI KATA2-MS-DC-BLK. ESI KATA2-MS-DC-BLK 8 pages. Dual monitor arm with sliders
Print Page
Kata2-MS
Caution
• Hand tighten screws only. Do not use power tools.
Please review these instructions before beginning the installation. Use the illustrations below to check that all the components needed for your
installation were provided with your order. Do not discard the packaging until the product works to your satisfaction.
Components and tools
for clamp mounting method:
monitor arm assemblies (2) and
clamp base assembly (1)
for both mounting methods:
VESA locking screws (2)
M4x10
M4x9 set screws (4)
Additional tools required
• Phillips screwdriver
dual Allen key (1)
2mm and 4mm
cable clips (2)
M4x15
M4x6 set screws (2)
grommet base cover (1)
Page 2
Components and tools
for optional
grommet mounting method:
monitor arm assemblies (2), plus . . .
grommet bar (1)
grommet knob (1)
clamp base assembly
not included when
optional grommet
mounting is ordered