CYP CMIR-882 Operation Manual - Page 8

Browse online or download pdf Operation Manual for Matrix Switcher CYP CMIR-882. CYP CMIR-882 20 pages. 8x8 bi-directional infrared matrix

Print Page

6. OPERATION CONTROLS AND FUNCTIONS

8x8 IR Matrix

LCM: Displays the setting information of each input and output

setting.

IR: IR Receiver window (accepts the remote control signal of this

device only).

Power: Press this button to power the device on/off. The LED will

illuminate green when the power is on, red when it is in 'Standby'

mode.

All: Press this button to select all IR output with one IR input signal.

The sequence should be: ALLNumber KeyENTER.

Lock: Press this button to lock all the buttons on the panel; press

again to unlock. The LED will illuminate green when locked.

Enter: Press this button to confirm the selection. Any selection will

be cancelled if the Enter button is not pressed after 20 seconds.

1~8/A~H: Use these buttons to select which source is selected for

control in each output location. Press a number key to select fromt

TV A to TV H channels and press a number key again to select

from Source 1 to Source 8 channels. Press 'Enter' to confirm the

selection.

Note: Press 'All', 'Enter' and '1' together to switch the RS-232 baud

rate to 9600 bps or press 'All', 'Enter' and '2' together to switch

baud rate to 19200 bps. The LCM will display the current baud rate

setting for few seconds.

Power

All

Lock

Enter