Ambient NanoLockit Tutorial - Page 2
Browse online or download pdf Tutorial for Camera Accessories Ambient NanoLockit. Ambient NanoLockit 5 pages. Timecode + logging
Also for Ambient NanoLockit: Quick Start Manual (2 pages), Quick Start Manual (2 pages), Quick Start Up Manual (20 pages), Quick Start Manual (5 pages), Manual (4 pages), Quick Manual (2 pages), Manual (19 pages)
Print Page
In this tutorial, we will show you how to timecode sync a DSLR-Camera
like the Sony Alpha 7s to an Ambient NanoLockit.
We will use the following gear: a Sony
Alpha 7s and an audio recorder.
To timecode sync this setup, you will
need two NanoLockits and these two
TC-IO-35RA timecode cables, which are
included when buying a NanoLockit.
Start the NanoLockits by pressing and
holding the power button for three sec-
onds.
The LED will flash green / red, which
means the LEMO timecode output is still
muted.
Press and hold the green button of one
NanoLockit for three seconds until LED
double-blinks green: This sets the time-
code and frame rate, wirelessly syncs all
other NanoLockits and activates all LEMO
outputs.
The NanoLockit always starts with its Real
Time Clock at last frame rate or at default
25 fps.
If successful, all units will flash green in
sync. Which means: they are ready to
sync other devices.