aero-naut Foxx Handmatig - Pagina 6

Blader online of download pdf Handmatig voor {categorie_naam} aero-naut Foxx. aero-naut Foxx 20 pagina's. Pylon racer

R 19

Install elevator servo in servo tray and drill

mounting holes for servo.

Install pushrod connector R 25 to servo horn and

install servo. Note that servo horn faces forward in

installed position. This will enable you to adjust

pushrod or remove servo horn through opening in

former R 6.

12 mm from the top drill rear end of fuselage with 2 mm for

elevator control.

Insert snake inner R 19 through rear end of fuselage and

through horizontal slot in former R 9. Apply glue to pushrod

housing at rear end of fuselage only and cut off ﬂush with

fuselage. Do not apply glue to slot in former R 9!