aero-naut Foxx Handmatig - Pagina 5
Blader online of download pdf Handmatig voor {categorie_naam} aero-naut Foxx. aero-naut Foxx 20 pagina's. Pylon racer
Pagina afdrukken
5
Sand triangular stock at rear end of fuselage so that fuselage sides meet.
Apply glue to R 6, R 8/R 9 and to contact surfaces of triangular stock, draw
fuselage sides together and secure with clamps and/or pins until glue has
dried.
Attention:
Make sure fuselage is absolutely symmetrical!
6
Select R 3 A or R 3 B for motor installation depending on the type of
motor you use.
Use R 3 A for 28 mm inrunners. Openings for the passage of cooling
air are arranged to guide cooling air through spinner and around
motor.
Use R 3 B for 28 mm outrunners. Openings for the passage of
cooling air are arranged to guide cooling air through openings in
front end shield of motor.
Tabs on all four sides allow for installation that suits motor best. Cut
off top and bottom tabs before you glue sheeting material in place.
Draw fuselage sides together, glue motor mount in place and secure
with clamps and tape.
R 3 A
R 3 B