aero-naut Foxx Handmatig - Pagina 4

Blader online of download pdf Handmatig voor {categorie_naam} aero-naut Foxx. aero-naut Foxx 20 pagina's. Pylon racer

Chamfer lower edge of former R 6 to match installed positon behind former R 5

and temporarily insert in slots in right fuselage side behind R 5.

Glue R 9 at an angle of 90° to servo tray R 8. Temporarily insert R 8/R 9 in slots in

rigth fuselage side below R 6.

Insert R 7 in slot at rear end of R 10.

R 6

Position left fuselage side R 2 onto tabs of formers

and check for proper ﬁt. Then remove left fuselage

side from formers.

Glue in place wing mount R 7, apply glue to formers

R 4, R 5 and glue left fuselage side in place. Secure

fuselage with suitable weight until glue has

completely dried.

Note: Leave R 6 and R 8/R 9 in installed position,

but do not glue!

R 9

R 8

R 6

R 7

R 2

R 8/9

R 5

R 10