aero-naut Foxx Handmatig - Pagina 3
Blader online of download pdf Handmatig voor {categorie_naam} aero-naut Foxx. aero-naut Foxx 20 pagina's. Pylon racer
Pagina afdrukken
R 5
1
Protect your building board with cling film and position
right fuselage side R 1 on building board.
R 1
R 4
Attention:
The fine lines indicating the position of
R 10
the canopy need to be visible on the outside of the
fuselage!
Glue in place wing support R 10 together with formers
R 4 and R 5. Make sure R 10 follows contour of wing
cut-out exactly. Remove any glue from slot at rear end
of R 10.
Glue wing support R 10 to inside of left fuselage side
R 2.
R 18
2
Cut to length 8×8 mm triangular stock R 18, glue to
inside of fuselage sides flush with fuselage contour
and secure with pins.