American Standard Right Height Elongated Toilet Triumph Cadet 3 Installatie-instructies Verzorging en onderhoud - Pagina 2

Blader online of download pdf Installatie-instructies Verzorging en onderhoud voor {categorie_naam} American Standard Right Height Elongated Toilet Triumph Cadet 3. American Standard Right Height Elongated Toilet Triumph Cadet 3 13 pagina's. 2-piece round front, elongated, right height toilets
Ook voor American Standard Right Height Elongated Toilet Triumph Cadet 3: Specificaties (1 pagina's), Specificatieblad (1 pagina's), Specificatieblad (1 pagina's), Specificatieblad (1 pagina's), Specificatieblad (1 pagina's), Specificatieblad (1 pagina's), Installatie-instructies (4 pagina's), Installatie-instructies Verzorging en onderhoud (4 pagina's), Installatie-instructies Verzorging en onderhoud (4 pagina's), Gebruikershandleiding (8 pagina's)

Before You Start:

Turn Off Water Supply

Recommended fitting type for

back-to-back installations.

Apply weight evenly. Do not move after

placement. Water tight seal may break.

Flush to remove

water from tank;

sponge remaining

water from

bowl before

removing toilet.

Depending upon your plumbing and venting conditions, the flow from the toilet in a back-to-back

installation may create a vacuum on the system and draw water from the opposing bowl. The

National Standards Plumbing Code prohibits the use of a cross fitting for drainage as throw over

is possible. The code does approve a directional "Y" style fitting with proper venting to direct the

water downward and away from the other toilet.

Press firmly.

Hand Tighten Only.

Do Not Overtighten.

- 2 -

Clean Flange

Caution: If leaving floor flange

open for more than 1-2 hours,

cover flange to prevent escaping

sewer gases.

TIP: Place 2 pieces of masking

tape on floor (as shown) to help

with alignment in step 4.

Tank-to-Bowl Gasket

Place the tank gasket over the tank nut

ensuring there are not gaps between the

gasket and the chinaware.

7301555-100 Rev. 4 2/22