American Standard Right Height Elongated Toilet Triumph Cadet 3 Kurulum Talimatları Bakım ve Onarım - Sayfa 2

Tuvaletler American Standard Right Height Elongated Toilet Triumph Cadet 3 için çevrimiçi göz atın veya pdf Kurulum Talimatları Bakım ve Onarım indirin. American Standard Right Height Elongated Toilet Triumph Cadet 3 13 sayfaları. 2-piece round front, elongated, right height toilets
Ayrıca American Standard Right Height Elongated Toilet Triumph Cadet 3 için: Teknik Özellikler (1 sayfalar), Şartname Sayfası (1 sayfalar), Şartname Sayfası (1 sayfalar), Şartname Sayfası (1 sayfalar), Şartname Sayfası (1 sayfalar), Şartname Sayfası (1 sayfalar), Kurulum Talimatları (4 sayfalar), Kurulum Talimatları Bakım ve Onarım (4 sayfalar), Kurulum Talimatları Bakım ve Onarım (4 sayfalar), Kullanıcı El Kitabı (8 sayfalar)

Before You Start:

Turn Off Water Supply

Recommended fitting type for

back-to-back installations.

Apply weight evenly. Do not move after

placement. Water tight seal may break.

Flush to remove

water from tank;

sponge remaining

water from

bowl before

removing toilet.

Depending upon your plumbing and venting conditions, the flow from the toilet in a back-to-back

installation may create a vacuum on the system and draw water from the opposing bowl. The

National Standards Plumbing Code prohibits the use of a cross fitting for drainage as throw over

is possible. The code does approve a directional "Y" style fitting with proper venting to direct the

water downward and away from the other toilet.

Press firmly.

Hand Tighten Only.

Do Not Overtighten.

- 2 -

Clean Flange

Caution: If leaving floor flange

open for more than 1-2 hours,

cover flange to prevent escaping

sewer gases.

TIP: Place 2 pieces of masking

tape on floor (as shown) to help

with alignment in step 4.

Tank-to-Bowl Gasket

Place the tank gasket over the tank nut

ensuring there are not gaps between the

gasket and the chinaware.

7301555-100 Rev. 4 2/22