Donovan Hammer II Gebruikershandleiding - Pagina 10
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Donovan Hammer II. Donovan Hammer II 20 pagina's. Arm system for belly dumps, end dumps, dump bodies & pups
Pagina afdrukken5-Spring External Pivot Installation
Item Part #
Description
1.
1809609 Spring Pivot Weldment - 5 Spring
2.
1800763 Flat Coil Torsion Spring
3.
1809583 Pivot Spring Weldment
J.
1800356 Carriage Bolt - 1/2" x 1-1/2"
N. 1800995 Lock Nut - 1/2"
R. 1800996 Flat Washer - 1/2"
S.
1800977 Shim - 1-1/4" x .047
T.
1800978 Retaining Ring - 1-1/4"
5-SPRING PIVOT ASSEMBLY
STEP 1: Clamp pivot assembly to box, centering shaft on
marked pivot point with slot in shaft facing downward.
NOTE: Double check pivot location before drilling any holes.
Using holes in pivot bracket as guide, mark and drill two
1/2" holes in box. Fasten assembly to box with screws
, washers
R
J
center on
marked pivot
point
drill
1/2"
holes
7
N
R
and nuts
. Repeat on opposite side.
N
N
R
J
3
J
P/N 1809533 Rev. B
2
1
S
T