Donovan Hammer II Kullanıcı El Kitabı - Sayfa 10
Endüstriyel Ekipmanlar Donovan Hammer II için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Donovan Hammer II 20 sayfaları. Arm system for belly dumps, end dumps, dump bodies & pups
Sayfayı Yazdır5-Spring External Pivot Installation
Item Part #
Description
1.
1809609 Spring Pivot Weldment - 5 Spring
2.
1800763 Flat Coil Torsion Spring
3.
1809583 Pivot Spring Weldment
J.
1800356 Carriage Bolt - 1/2" x 1-1/2"
N. 1800995 Lock Nut - 1/2"
R. 1800996 Flat Washer - 1/2"
S.
1800977 Shim - 1-1/4" x .047
T.
1800978 Retaining Ring - 1-1/4"
5-SPRING PIVOT ASSEMBLY
STEP 1: Clamp pivot assembly to box, centering shaft on
marked pivot point with slot in shaft facing downward.
NOTE: Double check pivot location before drilling any holes.
Using holes in pivot bracket as guide, mark and drill two
1/2" holes in box. Fasten assembly to box with screws
, washers
R
J
center on
marked pivot
point
drill
1/2"
holes
7
N
R
and nuts
. Repeat on opposite side.
N
N
R
J
3
J
P/N 1809533 Rev. B
2
1
S
T