DoorHan PCB-SH Handleiding programmeerinstructies - Pagina 11

Blader online of download pdf Handleiding programmeerinstructies voor {categorie_naam} DoorHan PCB-SH. DoorHan PCB-SH 12 pagina's. Control board
Ook voor DoorHan PCB-SH: Handleiding programmeerinstructies (14 pagina's), Handleiding programmeerinstructies (16 pagina's)

5. Then on a new transmitter press twice the button that you wish to control the operator. The Remote indicator will flash red

once to confirm that the receiver has learned the transmitter code.

NOTE. Perform transmitters programming within operating range of the operator receiver. The number of each button

can be determined by the dots on the transmitter body.

3.5. DISABLING OF REMOTE PROGRAMMING FUNCTION (FOR 1.1 SOFT ONLY)

If the function is enabled then the Remote indicator switches on and off once. If the function is disabled then the Remote

indicator won't switch on.

To enable / disable the function press and hold the R button, then supply power to the control board without releasing the

button.

3.6. MARKING OF DOORHAN TRANSMITTERS BUTTONS

TRANSMITTER PROGRAMMING