DoorHan PCB-SH Programlama Talimatları Kılavuzu - Sayfa 11
Kapı Açıcı DoorHan PCB-SH için çevrimiçi göz atın veya pdf Programlama Talimatları Kılavuzu indirin. DoorHan PCB-SH 12 sayfaları. Control board
Ayrıca DoorHan PCB-SH için: Programlama Talimatları Kılavuzu (14 sayfalar), Programlama Talimatları Kılavuzu (16 sayfalar)
Sayfayı Yazdır
5. Then on a new transmitter press twice the button that you wish to control the operator. The Remote indicator will flash red
once to confirm that the receiver has learned the transmitter code.
NOTE. Perform transmitters programming within operating range of the operator receiver. The number of each button
can be determined by the dots on the transmitter body.
3.5. DISABLING OF REMOTE PROGRAMMING FUNCTION (FOR 1.1 SOFT ONLY)
If the function is enabled then the Remote indicator switches on and off once. If the function is disabled then the Remote
indicator won't switch on.
To enable / disable the function press and hold the R button, then supply power to the control board without releasing the
button.
3.6. MARKING OF DOORHAN TRANSMITTERS BUTTONS
2
1
TRANSMITTER PROGRAMMING
1
3
4
2
11