Akw AKW23116 Installatie, onderhoud en gebruikersinstructies - Pagina 10

Blader online of download pdf Installatie, onderhoud en gebruikersinstructies voor {categorie_naam} Akw AKW23116. Akw AKW23116 16 pagina's. Basin mixer valve

Pagina afdrukken

Commissioning

Step 1

To Adjust Temperature Setting

1. Remove cover cap

2. Use a screwdriver to loosen the

centre screw in the lever.

3. Move the lever to full hot, note its

position and remove the lever.

4. Let the water run until the

temperature stabilises.

Step 2

1. Insert the 2mm A/F

hexagonal wrench key

(supplied) into the grub

screw in the centre of the

head assembly (refer to

illustration).

2. Rotate the grub screw as

necessary until the required

maximum blend temperature

is achieved. Rotate the grub

screw anticlockwise to increase

the temperature or clockwise to decrease

the temperature (refer to illustration).

3. Refit the lever in its original position. If required the lever can be fitted in any

position that allows unobstructed movement of the lever over its operating range.

4. Move the lever to the off position.

5. Use the screwdriver to tighten the screw in the lever.