Canon XL 1 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Canon XL 1. Canon XL 1 26 pagina's. Camcorder
Ook voor Canon XL 1: Brochure (8 pagina's), Specificaties (1 pagina's), Instructies (2 pagina's), Brochure & specificaties (8 pagina's), Gebruikershandleiding (9 pagina's), Handmatig (9 pagina's)

• Using the various recoding programmes

The camera provides you with a choice of six recording programs. They use different

combinations of camera settings in order to adjust the exposure and other functions to

match the recording situation.

The name of your selected recording program appears constantly on the left of the

display, with the exception of the Easy Recording program whose mark is displayed

and then disappears after 4 seconds.

Easy recording

The simplest way to use the camera is with the POWER dial set to the position. The

camera will take care of focus, exposure and other adjustments, leaving you free to

point and shoot.

Auto

In normal recording conditions, set the POWER dial to (Auto). This is the same as the

Easy Recording program, except that you now have the option of using any of the

camera's manual functions — you can adjust focus and exposure, set the white

balance, and so on.

Manual

Select this program for total creative freedom when operating the camcorder. You can

set aperture and shutter speeds completely independently to give you exactly the

exposure you require.

Giving priority to shutter speed (Tv)

Use this program to let you select the shutter speed.

The camera sets the appropriate aperture (F number) automatically to give the correct

exposure. When you turn the POWER dial to Tv, the current shutter speed is shown in

the viewfinder. Select your desired shutter speed by pressing the SHUTTER and other

buttons.

You can choose 9 shutter speeds between 1/60 and 1/15,000 of a second.

• If you try to set a shutter speed that is either too high or too low for the shooting

conditions, the indicator flashes in the viewfinder. In this case, increase or decrease

the setting until the flashing stops, or slide the ND FILTER switch ON/OFF as

appropriate before changing the setting.