Follett HCD1650NBT Snelstarthandleiding - Pagina 3

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Follett HCD1650NBT. Follett HCD1650NBT 8 pagina's. With remote air-cooled condensing unit
Ook voor Follett HCD1650NBT: Handleiding voor installatie-instructies (17 pagina's), Handmatig (8 pagina's)

Pagina afdrukken

Dimensional drawing

Specification

W1 Width

D1 Depth

H1 Height

Electrical single phase

Electrical three phase

Minimum circuit ampacity

Minimum overcurrent protection

Electrical

208‑230 V/60/3 ‑ three phase

Cooling unit operating limits

(air temperature)

Maximum refrigerant line run length

Maximum line rise above evaporator

Evaporator mounting above condenser

Maximum refrigeration line drop

BTU/hr (Kcal/hr) at

0 F (‑18 C) evaporator, 90 F (32 C) ambient air, 1650N units only)

Rack systems * EPR valve ‑ set to

Approximate ship weight

NOTE:

1. 1650 model condensing units have a liquid suction line heat exchanger. The entire liquid line should be insulated separately from

the suction line.

2. Outdoor installation of low side is not recommended and will void warranty.

* EPR valve to be supplied by installer.

Remote 1650 series ice machine

36.25" (92.0 cm) – all models

25.50" (64.8 cm) – all models

26.10" (66.3 cm) – all models

208‑230/60/1

208‑230/60/3

single phase 29.90 A

three phase 21.24 A

single phase 50 A

three phase 35 A

35 amps, requires dedicated

amp circuit, internal connection

min ‑20 F (‑29 C)

max 120 F (49 C)

100' (30.5 m)

35' (10.7 m)

15' (4.6 m)

13,000 (3,276)

0 F (‑18 C)

340 lb (154 kg)

Form# 7040