Ampt ANALOGER ADG-1 Gebruikershandleiding - Pagina 7
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Ampt ANALOGER ADG-1. Ampt ANALOGER ADG-1 20 pagina's. 100% analog bucket brigade delay
Pagina afdrukken
Getting Started
Let's explore the range of controls of your ADG-1.
Connect your guitar or other instrument to the INput jack. Connect an
amplifier to the OUTput jack, and if you have an expression pedal (or 0-
5V control voltage source like a synthesizer output), connect it to the
EXPression input.
Use a 9V regulated 2.1mm, center-negative, power supply, capable of
providing at least 200mA of power and connect it to the 9V DC input.
Be sure to power up your ADG-1 BEFORE turning on your amplifier to
prevent speaker pop and the potential to damage your speakers or
headphones.
Note: If not using the expression input; be sure the expression switch is
NOT SET TO THE TIME POSITION to start. We recommend setting it
to AMT if not using this feature.
To start, set the ADG-1 to the
Home position as shown in the
graphics to the right.
Set TIME, MIX & TONE
straight up (12:00).
Set FEEDBACK, RATE &
AMOUNT switch fully counter-
clockwise (7:00).
Set DRIVE slightly up, around 9:00.
Set the Bucket and LFO switches to the down position.
There is no way to damage the ADG-1 through knob settings so feel free to
explore how the controls work. Go ahead, play with your ADG-1 and have
fun. There are some gotchas and advanced possibilities so once you are
done having fun read on to learn more about the ADG-1.
<7>