DPS Turbonator VGT Installatiehandleiding - Pagina 13

Blader online of download pdf Installatiehandleiding voor {categorie_naam} DPS Turbonator VGT. DPS Turbonator VGT 13 pagina's.

Bending instructions (only if necessary):

Route the new copper tubing from the pressure sensor

fitting to the fitting installed in exhaust housing. Be

careful not to kink the tube. Use 1.0-1.5 inch PVC pipe as

a mandrel to bend the tube. Once the tube is bent, do

not try to straighten or it could kink.

If the tubing is too long, it can be coiled around a pipe to

shorten as needed.

Revision 1.3

Revision Date 1/28/2020

Turbonator® VGT Controller