3M G5 Technisch bulletin - Pagina 7

Blader online of download pdf Technisch bulletin voor {categorie_naam} 3M G5. 3M G5 12 pagina's. Drive-thru systems
Ook voor 3M G5: Snelle referentiehandleiding (2 pagina's), Technisch bulletin (6 pagina's), Technisch bulletin (2 pagina's), Handmatig (10 pagina's), Snelstarthandleiding (3 pagina's), Handmatig (8 pagina's)

3M™ Drive-Thru Systems

Install External Antenna(s)

If the store currently uses an External Antenna (either Omni-Directional or Patch Antenna), it is assumed that the

location of the external antenna is not going to change.

Follow the steps below to re-connect the existing external antenna.

a. Remove the external antenna cable from the XT-1 Basestation at the antenna connector.

b. Remove either the left or top antenna on the G5 Basestation.

IMPORTANT NOTE

DO NOT use a tool to tighten the pigtail to the Base Station; leave the connection finger tight.

c. Connect the external antenna cable removed from the XT-1 Basestation to the G5 Basestation antenna connec-

tor in the spot where the antenna was just removed.

Technical Bulletin #161 Release B

G5 Basestation Antenna