3M G5 Technical Bulletin - Page 7

Browse online or download pdf Technical Bulletin for Headsets 3M G5. 3M G5 12 pages. Drive-thru systems
Also for 3M G5: Quick Reference Manual (2 pages), Technical Bulletin (6 pages), Technical Bulletin (2 pages), Manual (10 pages), Quick Start Manual (3 pages), Manual (8 pages)

Print Page

3M™ Drive-Thru Systems

Install External Antenna(s)

If the store currently uses an External Antenna (either Omni-Directional or Patch Antenna), it is assumed that the

location of the external antenna is not going to change.

Follow the steps below to re-connect the existing external antenna.

a. Remove the external antenna cable from the XT-1 Basestation at the antenna connector.

b. Remove either the left or top antenna on the G5 Basestation.

IMPORTANT NOTE

DO NOT use a tool to tighten the pigtail to the Base Station; leave the connection finger tight.

c. Connect the external antenna cable removed from the XT-1 Basestation to the G5 Basestation antenna connec-

tor in the spot where the antenna was just removed.

Technical Bulletin #161 Release B

G5 Basestation Antenna