3M G5 Teknik Bülten - Sayfa 7

Kulaklıklar 3M G5 için çevrimiçi göz atın veya pdf Teknik Bülten indirin. 3M G5 12 sayfaları. Drive-thru systems
Ayrıca 3M G5 için: Hızlı Referans Kılavuzu (2 sayfalar), Teknik Bülten (6 sayfalar), Teknik Bülten (2 sayfalar), Manuel (10 sayfalar), Hızlı Başlangıç Kılavuzu (3 sayfalar), Manuel (8 sayfalar)

3M™ Drive-Thru Systems

Install External Antenna(s)

If the store currently uses an External Antenna (either Omni-Directional or Patch Antenna), it is assumed that the

location of the external antenna is not going to change.

Follow the steps below to re-connect the existing external antenna.

a. Remove the external antenna cable from the XT-1 Basestation at the antenna connector.

b. Remove either the left or top antenna on the G5 Basestation.

IMPORTANT NOTE

DO NOT use a tool to tighten the pigtail to the Base Station; leave the connection finger tight.

c. Connect the external antenna cable removed from the XT-1 Basestation to the G5 Basestation antenna connec-

tor in the spot where the antenna was just removed.

Technical Bulletin #161 Release B

G5 Basestation Antenna