DSC Power Series Handmatig - Pagina 16

Blader online of download pdf Handmatig voor {categorie_naam} DSC Power Series. DSC Power Series 18 pagina's. Neo image sensor
Ook voor DSC Power Series: Referentiehandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Installatiehandleiding (14 pagina's), Installatie-instructies (2 pagina's), Beknopte handleiding (4 pagina's), Handleiding voor installatie-instructies (11 pagina's)

DSC Power Series PC1616 PC1832 PC1864 System Manual

[3] - G, H, I, 3

[4] - J, K, L, 4

[5] - M, N, O, 5

[6] - P, Q, R, 6

[7] - S, T, U, 7

[8] - V, W, X, 8

[9] - Y, Z, 9, 0

[0] - Space

7. When the required letter or number is displayed use the arrow keys ([< >]) to scroll to the next

letter.

8. When you are finished programming the Zone Label, press the [*] key, scroll to "Save," then press

[*].

9. Continue from Step 2 until all Labels are programmed.

Viewing the Event Buffer from a PK5500/LCD5500 Keypad

The event buffer will show you a list of the last 500 events that have occurred on your system. You must

use an LCD keypad to view the event buffer.

1. Press [*][6][Master Code].

2. To select Event Buffer viewing, press [*].

3. The keypad will display the event number, partition or area, and the time and date. Press [*] to

switch between this information and the event details.

4. Use the [< >] keys to scroll through the events in the buffer.

5. To exit event buffer viewing, press [#].

PK5500 Global Status Screen

When the keypad is loaned to global mode (pressing and holding the [#] key), you will see a Global

Partition Status screen. This shows basic status for up to 8 partitions, depending on the configuration of

your system.

Each partition is identified by a number. Below each number is the current status of that partition.

A - Partition is Armed

N - Partition is Not Ready to Arm

R - Partition is Ready to Arm

! - Partition is in Alarmed

- - Partition is Not Enabled

PK5500 Global Status Screen

https://alpha.adt.com/help/61[11/12/2018 9:40:17 PM]