DSC Power Series 매뉴얼 - 페이지 16
{카테고리_이름} DSC Power Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DSC Power Series 18 페이지. Neo image sensor
DSC Power Series에 대해서도 마찬가지입니다: 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 설치 매뉴얼 (14 페이지), 설치 지침 (2 페이지), 빠른 매뉴얼 (4 페이지), 설치 지침 매뉴얼 (11 페이지)
페이지 인쇄
DSC Power Series PC1616 PC1832 PC1864 System Manual
[3] - G, H, I, 3
[4] - J, K, L, 4
[5] - M, N, O, 5
[6] - P, Q, R, 6
[7] - S, T, U, 7
[8] - V, W, X, 8
[9] - Y, Z, 9, 0
[0] - Space
7. When the required letter or number is displayed use the arrow keys ([< >]) to scroll to the next
letter.
8. When you are finished programming the Zone Label, press the [*] key, scroll to "Save," then press
[*].
9. Continue from Step 2 until all Labels are programmed.
Viewing the Event Buffer from a PK5500/LCD5500 Keypad
The event buffer will show you a list of the last 500 events that have occurred on your system. You must
use an LCD keypad to view the event buffer.
1. Press [*][6][Master Code].
2. To select Event Buffer viewing, press [*].
3. The keypad will display the event number, partition or area, and the time and date. Press [*] to
switch between this information and the event details.
4. Use the [< >] keys to scroll through the events in the buffer.
5. To exit event buffer viewing, press [#].
PK5500 Global Status Screen
When the keypad is loaned to global mode (pressing and holding the [#] key), you will see a Global
Partition Status screen. This shows basic status for up to 8 partitions, depending on the configuration of
your system.
Each partition is identified by a number. Below each number is the current status of that partition.
A - Partition is Armed
N - Partition is Not Ready to Arm
R - Partition is Ready to Arm
! - Partition is in Alarmed
- - Partition is Not Enabled
PK5500 Global Status Screen
https://alpha.adt.com/help/61[11/12/2018 9:40:17 PM]