DSC Power Series Manuale - Pagina 16

Sfoglia online o scarica il pdf Manuale per Schermo tattile DSC Power Series. DSC Power Series 18. Neo image sensor
Anche per DSC Power Series: Manuale di riferimento (2 pagine), Manuale di riferimento rapido (2 pagine), Manuale di installazione (14 pagine), Istruzioni per l'installazione (2 pagine), Manuale rapido (4 pagine), Manuale di istruzioni per l'installazione (11 pagine)

DSC Power Series PC1616 PC1832 PC1864 System Manual

[3] - G, H, I, 3

[4] - J, K, L, 4

[5] - M, N, O, 5

[6] - P, Q, R, 6

[7] - S, T, U, 7

[8] - V, W, X, 8

[9] - Y, Z, 9, 0

[0] - Space

7. When the required letter or number is displayed use the arrow keys ([< >]) to scroll to the next

letter.

8. When you are finished programming the Zone Label, press the [*] key, scroll to "Save," then press

[*].

9. Continue from Step 2 until all Labels are programmed.

Viewing the Event Buffer from a PK5500/LCD5500 Keypad

The event buffer will show you a list of the last 500 events that have occurred on your system. You must

use an LCD keypad to view the event buffer.

1. Press [*][6][Master Code].

2. To select Event Buffer viewing, press [*].

3. The keypad will display the event number, partition or area, and the time and date. Press [*] to

switch between this information and the event details.

4. Use the [< >] keys to scroll through the events in the buffer.

5. To exit event buffer viewing, press [#].

PK5500 Global Status Screen

When the keypad is loaned to global mode (pressing and holding the [#] key), you will see a Global

Partition Status screen. This shows basic status for up to 8 partitions, depending on the configuration of

your system.

Each partition is identified by a number. Below each number is the current status of that partition.

A - Partition is Armed

N - Partition is Not Ready to Arm

R - Partition is Ready to Arm

! - Partition is in Alarmed

- - Partition is Not Enabled

PK5500 Global Status Screen

https://alpha.adt.com/help/61[11/12/2018 9:40:17 PM]