AnyCubic Kobra Handmatig - Pagina 5
Blader online of download pdf Handmatig voor {categorie_naam} AnyCubic Kobra. AnyCubic Kobra 10 pagina's.
Ook voor AnyCubic Kobra: Gebruikershandleiding (13 pagina's)
Pagina afdrukken
Before commissioning a device, it must generally be checked whether this device or the
•
assembly is fundamentally suitable for the application for which it is to be used! In case of
doubt, it is absolutely necessary to consult specialists, experts or the manufacturers of the
assemblies used!
Please note that operating and connection errors are beyond our control. Understandably,
•
we cannot accept any liability for damage resulting from them.
In case of malfunction, this kit should be returned with an exact description of the error
•
(indicating what is not working... because only an exact description of the error allows a
proper repair!) and the corresponding assembly instructions as well as without the case.
Time-consuming assemblies or disassemblies of housings have to be charged additionally
for understandable reasons. Already assembled kits are excluded from exchange. When
installing and handling mains voltage, it is essential to observe the VDE regulations.
Devices that are operated at a voltage ≥ 35 V may only be connected by a specialist.
•
Always check whether the kit is suitable or can be used for the respective application and
•
place of use.
In principle, commissioning may only take place if the circuit is installed in a housing
•
absolutely safe to touch.
If measurements are unavoidable when the housing is open, an isolating transformer
•
must be connected in between for safety reasons, or, as already mentioned, the voltage
must be supplied via a suitable power supply unit (which complies with the safety
regulations).
All wiring work may only be carried out in a de-energized state.
•
Before opening the housing
BREACH OF WARRANTY
Attention the warranty will be lost if the case is opened!
Page 4 of 9