AnyCubic Kobra Handmatig - Pagina 7
Blader online of download pdf Handmatig voor {categorie_naam} AnyCubic Kobra. AnyCubic Kobra 10 pagina's.
Ook voor AnyCubic Kobra: Gebruikershandleiding (13 pagina's)
Pagina afdrukken
CONVERSION
1
Remove the screws from the extruder cover.
3
Carefully remove all plugs. Remove these two
screws.
2
Remove the cable and the 4 screws
and remove the print head.
4
Then put on the washers and fix the board
with the original screws.
Page 6 of 9