AnyCubic Kobra Handmatig - Pagina 8
Blader online of download pdf Handmatig voor {categorie_naam} AnyCubic Kobra. AnyCubic Kobra 10 pagina's.
Ook voor AnyCubic Kobra: Gebruikershandleiding (13 pagina's)
Pagina afdrukken
5
Reconnect the cables.
7
On the underside, unscrew the cover above the mainboard. (2 screws.
Unscrew the cable holders and remove the old cable.
Then install the two new cables in the same way as the old one.
Reattach the cable holders and plug in the connectors on the mainboard, extruder and
printhead.
Replace the bottom with the two screws.
Fix the cables but be careful not to restrict the movement of the cables.
6
Screw the printhead back on with 3 screws.
(The screw at the top left will be inserted
later!)
Screw the cover back on.
Page 7 of 9