Danfoss FP735Si Installatiehandleiding - Pagina 11

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Danfoss FP735Si. Danfoss FP735Si 20 pagina's. Electronic 3-channel full programmer for heating and hot water with service interval timer
Ook voor Danfoss FP735Si: Beknopte handleiding (4 pagina's), Eenvoudige gebruikershandleiding (2 pagina's)

Pagina afdrukken

7.0 Advanced Programming

To access the Advanced Programming follow the steps below:

a) Press and hold PROG and V for 5 seconds.

The display will change to look like this.

b) Press the + and - keys to scroll backwards and forwards between

parameters.

Press the V and Λ keys to change the parameter setting.

The fl ashing digits in the center of the display indicate the

number of the selected option. The large characters in the top or

bottom of the display indicate the option value selected.

c) Press and hold PROG until the display

returns to RUN mode.

Danfoss Heating

Parameter setting

Parameter number