Danfoss FP735Si Installatiehandleiding - Pagina 12

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Danfoss FP735Si. Danfoss FP735Si 20 pagina's. Electronic 3-channel full programmer for heating and hot water with service interval timer
Ook voor Danfoss FP735Si: Beknopte handleiding (4 pagina's), Eenvoudige gebruikershandleiding (2 pagina's)

Pagina afdrukken

In the Advanced Programming mode, the following parameters can

be changed:

Parameter1 – Enable/Disable A+B Days

This allows the unit to operate in A+B days.

A and B days can be grouped arbitrarily: 5+2, 4+3, etc.

The days do not have to run in sequence.

Press + until parameter 1 is displayed.

Press V or Λ to select the required setting.

Note: A+B setting is only possible if operating mode

5+2 has been set in Advanced Programming.

WARNING: Changing this parameter will reset event

times to default values.

0 = disabled (default)

1 = enabled

Parameter 2 – Copy functions

This parameter sets the unit to operate with the

Standard Copy function or the Advanced Copy

function.

Press + until parameter 2 is displayed.

Press V or Λ to select the required setting.

Note: Advanced Copy setting is only possible if

operating mode 7 day has been set in Advanced

Programming.

0 = Standard Copy (default)

1 = Advanced Copy

Parameter 3 – Summer/winter

The Summer/winter parameter makes it possible

to let the unit change between summer and winter

period automatically or manually. The parameter can

also disable the change between summer and winter.

Press + until parameter 3 is displayed.

Press V or Λ to select the required setting.

0 = disable summer/winter change

1 = enable manual summer/winter change

2 = enable automatic summer/winter change (default)

FP735SI