Danfoss FP735Si Installatiehandleiding - Pagina 14

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Danfoss FP735Si. Danfoss FP735Si 20 pagina's. Electronic 3-channel full programmer for heating and hot water with service interval timer
Ook voor Danfoss FP735Si: Beknopte handleiding (4 pagina's), Eenvoudige gebruikershandleiding (2 pagina's)

Pagina afdrukken

Parameter 7 – Keyboard Lock

This parameter sets the unit to operate with

an enabled (functioning) or a disabled (locked)

keyboard.

Press + until parameter 7 is displayed

Press V or Λ to select the required setting.

0 = the keyboard is enabled (default)

1 = the keyboard is disabled (locked)

8.0 Service Interval Timer

The FP735Si is equipped with an installer setback service interval

timer. If this feature is required please contact our technical

department. Setting instructions for this gas safety feature are only

available to bona fi de heating installers.

9.0 Copy Functions

FP735Si provides 3 copy functions: Standard Copy, Advanced

Copy and Channel Copy. Standard Copy is the default setting.

If the Advanced Copy function is wanted, it must be changed in

Advanced Programming mode (page 13). Channel Copy is always

available.

Standard Copy

Pressing COPY/i will copy the previous day's events into the

displayed day. The unit will then display the 1st event for the new

day.

The Standard Copy function is only present if the unit is set to run in

7 day mode, or 5+2 day mode.

FP735SI