Danfoss FP735Si Installatiehandleiding - Pagina 13

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Danfoss FP735Si. Danfoss FP735Si 20 pagina's. Electronic 3-channel full programmer for heating and hot water with service interval timer
Ook voor Danfoss FP735Si: Beknopte handleiding (4 pagina's), Eenvoudige gebruikershandleiding (2 pagina's)

Pagina afdrukken

Parameter 4 – Backlight

The backlight parameter allows the backlight to be

always on, always off , or on for 15 seconds after the

last key press.

Press + until parameter 4 is displayed.

Press V or Λ to select the required setting.

0 = backlight always off

1 = backlight on for 15 seconds after the last key press (default)

2 = backlight always on

Parameter 5 – Number of events per day

This parameter sets the unit to operate with 4 or

6 events per day. An event being an ON or an OFF

period of room heating and/or hot water heating.

Press + until parameter 5 is displayed.

Press V or Λ to select the required setting.

WARNING: Changing this parameter will reset event

times to default values.

2 = 2 ON/OFF periods per day

3 = 3 ON/OFF periods per day (default)

Parameter 6 – Operating Mode

(7 Day, 5+2 Day or 24 Hour)

This parameter sets the unit to operate using either 7

day, 5+2 day or 24 hour mode.

Press + until Option 6 is displayed.

Press V or Λ to select the required setting.

WARNING: Changing this parameter will reset event

times to default values.

24 = 24 hour

5-2 = 5+2 Day (or A+B if set in parameter 1)

7 = 7 day (default)

Danfoss Heating