Audionet AMP II MAX Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Audionet AMP II MAX. Audionet AMP II MAX 13 pagina's.
Ook voor Audionet AMP II MAX: Gebruikershandleiding (13 pagina's)

Audionet AMP II MAX Gebruikershandleiding

Setting up your system

Placing
Your Audionet AMP II MAX have the perfect dimensions to be placed
near your speakers. But positioned side by side both AMP II MAX are 43
cm in width (standard width).
Do not cover the top to prevent the amplifiers from overheating!
Power connections
Please connect the power jack at the rear to your wall outlet using the
provided Audionet Power Cord (APC).
The voltage specified at the rear of your AMP II MAX must match your
mains specifications. The AMP II MAX is a Class I unit and has to be
earthed.
Mains phase recognition
The correct polarization of the mains is important for reasons of audio
clarity and stability. Please make sure that the pin labled "
" at your
Phase
APC is connected to the "hot" pin of your wall outlet. The Audionet
AMP II MAX indicates a wrong polarization of the mains lead. If you
read: "Attention: Mains Phase incorrect" when powering
up, switch off the AMP II MAX and flip the plug in your wall outlet.
3