Datamax I-Class Mark II Installatie- en gebruikshandleiding - Pagina 4

Blader online of download pdf Installatie- en gebruikshandleiding voor {categorie_naam} Datamax I-Class Mark II. Datamax I-Class Mark II 12 pagina's. General purpose input output (gpio) option
Ook voor Datamax I-Class Mark II: Snelstarthandleiding (4 pagina's)

Pagina afdrukken

1. Installing the Option
2. Setup and Operation

Installing the Option

If the GPIO Card is already installed in the printer, skip this section and proceed to

"Configuring the Hardware". Otherwise, install the GPIO Card as described below:

A) Turn off and disconnect the power cord from the printer. Remove the three Screws

from the left side cover of the printer.

B) Open the printer's cover, loosen (do not remove) the two Screws on the inside of the

printer and lift the Cover Assembly up and off the printer.

Screws

Cover

Assembly

Screws