Datamax I-Class Mark II Kurulum ve Kullanım Kılavuzu - Sayfa 4

Yazıcı Datamax I-Class Mark II için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Datamax I-Class Mark II 12 sayfaları. General purpose input output (gpio) option
Ayrıca Datamax I-Class Mark II için: Hızlı Başlangıç Kılavuzu (4 sayfalar)

Sayfayı Yazdır

1. Installing the Option
2. Setup and Operation

Installing the Option

If the GPIO Card is already installed in the printer, skip this section and proceed to

"Configuring the Hardware". Otherwise, install the GPIO Card as described below:

A) Turn off and disconnect the power cord from the printer. Remove the three Screws

from the left side cover of the printer.

B) Open the printer's cover, loosen (do not remove) the two Screws on the inside of the

printer and lift the Cover Assembly up and off the printer.

Screws

Cover

Assembly

Screws