Aircraft Automation ECOTRIM Handleiding voor piloten - Pagina 16
Blader online of download pdf Handleiding voor piloten voor {categorie_naam} Aircraft Automation ECOTRIM. Aircraft Automation ECOTRIM 18 pagina's. Trim system
Pagina afdrukkenAircraft Automation
Pin 15: Fused (or breaker) power should be connected to this Red wire. The instrument
will run from 9 to 32 Volts DC and should be protected with a 3-amp fuse or breaker.
Connection to Servos:
Each servo (pitch and roll) is connected through a 3-pin standard Model Radio Control
connector:
- Pin 1 (black wire/black shrink tube): ground
- Pin 2 (White/Orange wire): 5-vdc servo supply
- Pin 3 (Blue/Orange wire): Pulse Width Modulation (PWM) servo command.
Connect each servo or extension so that the black wire is aligned with black wire/black
shrink tube. Reverse connection of these cables will prevent the servos from working
normally but will not produce any permanent damage.
NOTE: for trim tab installation please refer to the separate Trim Tab installation manual
or videos at:
https://aircraftautomation.com/support/
16 |
P a g e
ECOTRIM Trim System