Aircraft Automation ECOTRIM Manual do Piloto - Página 16

Procurar online ou descarregar pdf Manual do Piloto para Sistema de piloto automático Aircraft Automation ECOTRIM. Aircraft Automation ECOTRIM 18 páginas. Trim system

Imprimir página

Aircraft Automation

Pin 15: Fused (or breaker) power should be connected to this Red wire. The instrument

will run from 9 to 32 Volts DC and should be protected with a 3-amp fuse or breaker.

Connection to Servos:

Each servo (pitch and roll) is connected through a 3-pin standard Model Radio Control

connector:

- Pin 1 (black wire/black shrink tube): ground

- Pin 2 (White/Orange wire): 5-vdc servo supply

- Pin 3 (Blue/Orange wire): Pulse Width Modulation (PWM) servo command.

Connect each servo or extension so that the black wire is aligned with black wire/black

shrink tube. Reverse connection of these cables will prevent the servos from working

normally but will not produce any permanent damage.

NOTE: for trim tab installation please refer to the separate Trim Tab installation manual

or videos at:

https://aircraftautomation.com/support/

16 |

P a g e

ECOTRIM Trim System