DBZ DMi 2/4000A Gebruikershandleiding - Pagina 13

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DBZ DMi 2/4000A. DBZ DMi 2/4000A 20 pagina's. Professional power amplifier

Connect the speakers as shown below. Note that the speaker impedance varies depending on the

connection method and the connected speaker parameters. Be sure that the speaker impedance is not

lower than the lowest value shown below.

The output speaker cable must be connected to the positive pole of channel 1 and the negative pole of

channel 2.

The bridge output is doubling the output voltage.

If the amplifier is set to BRIDGE mode: only the CH1 volume knob is active. (The CH2 volume knob is

disabled)

Stereo/Parallel Mode

INPUT (CH1, CH2)

Each channel is equipped with two sockets. Note that when using BRIDGE or PARALLEL mode,

only the channel 1 is valid.

Connection Mode Introduction

OUTPUT

CH1+/- =1+/-

CH2+/- =2+/-

BRG+/- =1+/2

CH2+/- =1+/-

2+/- =NOT USED

CH1+/- =1+/-

CH2+/- =2+/-

BRG+/- =1+/2

CH2+/- =1+/-

2+/- =NOT USED

Channel 1

Loudspeaker

Stereo/Parallel Mode Speakon 1 connection

Two speaker connection

OUTPUT

CH1+/- =1+/-

CH2+/- =2+/-

BRG+/- =1+/2

CH2+/- =1+/-

2+/- =NOT USED

Stereo/Parallel Mode Speakon 2 connection

OUTPUT

Channel 2

Loudspeaker

Channel 2

Loudspeaker