DBZ DMi 2/4000A Gebruikershandleiding - Pagina 14
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DBZ DMi 2/4000A. DBZ DMi 2/4000A 20 pagina's. Professional power amplifier
Pagina afdrukkenConnect the speakers as shown below. Note that the speaker impedance varies depending on the
connection method and the connected speaker parameters. Be sure that the speaker impedance is not
lower than the lowest value shown below.
Bridge Mode
The output speaker cable must be connected to the positive pole of channel 1 and the negative pole of
channel 2.
The bridge output is doubling the output voltage.
OUTPUT
2
1
CH
CH
CH1+/-=1+/-
CH2+/-=1+/-
CH2+/-=2+/-
GROUND
2+/-=NOT USED
BRG+/-=1+/2-
If the amplifier is set to BRIDGE mode: only the CH1and CH3 volume knob is active. (The CH2/ CH4 volume
knob is out of use)
Stereo/Parallel Mode
OUTPUT
2
CH
CH2+/-=1+/-
2+/-=NOT USED
Channel 1
Loudspeaker
Stereo/Parallel Mode Speakon 1 connection
Two speaker connection
1
CH
CH1+/-=1+/-
CH2+/-=2+/-
BRG+/-=1+/2-
3
CH
CH3+/-=1+/-
CH4+/-=2+/-
BRG+/-=1+/2-
Channel 3
Loudspeaker
Stereo/Parallel Mode Speakon 3 connection
INPUT
Each channel is equipped with two sockets. CH1 and CH3 both have a parallel/LINK output socket.
12
Connection Mode Introduction
1
CH
CH1+/-=1+/-
CH2+/-=2+/-
GROUND
BRG+/-=1+/2-
Channel 2
Loudspeaker
Channel 4
Loudspeaker
1
CH
CH1+/-=1+/-
CH2+/-=2+/-
BRG+/-=1+/2-
3
CH
CH3+/-=1+/-
CH4+/-=2+/-
BRG+/-=1+/2-
OUTPUT
2
1
CH
CH
CH1+/-=1+/-
CH2+/-=1+/-
CH2+/-=2+/-
2+/-=NOT USED
GROUND
BRG+/-=1+/2-
Stereo/Parallel Mode Speakon 2 connection
Two speaker connection
OUTPUT
3
CH
CH2+/-=1+/-
2+/-=NOT USED
4
CH
CH4+/-=1+/-
2+/-=NOT USED
Stereo/Parallel Mode Speakon 4 connection
Channel 2
Loudspeaker
Channel 2
Loudspeaker