Garmin GDL 69A Gebruiksaanwijzing - Pagina 20

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Garmin GDL 69A. Garmin GDL 69A 44 pagina's. Xm satellite radio instructions for continued airworthiness
Ook voor Garmin GDL 69A: Activatie-instructies (46 pagina's), Handleiding voor piloten Addendum (50 pagina's), Activatie-instructies (38 pagina's), Handleiding voor piloten Addendum (50 pagina's), Activatie-instructies (16 pagina's), Gebruiksaanwijzing (8 pagina's), Handmatig (15 pagina's)

5. Refer to Table 4-1 to read the SAT ID/CONNECTIVITY information.

6. Verify radio IDs and signal quality is between 2 – 3. If signal quality is zero, check the antenna and

wiring.

'- -'

'XM'

'X0', 'X1', 'X2', or 'X3'

'-0', '-1', '-2', or '-3'

"Searching..."

"Satellite in view"

4.3 Verify SiriusXM Subscribed Services

The 430/530 supports the following weather services: NEXRAD, graphical METAR, text-based

METAR, Wind, and Graphical Temperature/Dew Point. These services are available only in the

United States. Verify included services by displaying them on the unit, if applicable. If signal quality is

between 1 and 3, but no data is displayed, contact SiriusXM Satellite Radio to verify subscription. Be

sure that the unit is updated with the most current software.

Page 14

GDL 69/69A XM Satellite Radio Activation Procedures

SAT ID Field

GDL 69/69H – 430/530 Series interface communications not yet established.

GDL 69/69H not yet communicating with internal satellite radio hardware (normal

during power-up).

'X' = Satellite radio service activated. Satellite signal quality is indicated by the

numbers 0, 1, 2, or 3; where 0=none, 1=poor, 2=good, and 3=excellent.

'-' = Satellite radio service is not activated. Satellite signal quality is indicated by

the numbers 0, 1, 2, or 3; where 0=none, 1=poor, 2=good, and 3=excellent.

Connectivity Field

No satellite is currently in view, signal quality is '0'.

Indicates a signal quality between 1 and 3.

190-00355-04

Rev. K