Garmin GDL 69A Руководство по эксплуатации - Страница 20

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Дисплей авионики Garmin GDL 69A. Garmin GDL 69A 44 страницы. Xm satellite radio instructions for continued airworthiness
Также для Garmin GDL 69A: Инструкции по активации (46 страниц), Дополнение к руководству пилота (50 страниц), Инструкции по активации (38 страниц), Дополнение к руководству пилота (50 страниц), Инструкции по активации (16 страниц), Руководство по эксплуатации (8 страниц), Руководство (15 страниц)

Garmin GDL 69A Руководство по эксплуатации
5. Refer to Table 4-1 to read the SAT ID/CONNECTIVITY information.
6. Verify radio IDs and signal quality is between 2 – 3. If signal quality is zero, check the antenna and
wiring.
'- -'
'XM'
'X0', 'X1', 'X2', or 'X3'
'-0', '-1', '-2', or '-3'
"Searching..."
"Satellite in view"

4.3 Verify SiriusXM Subscribed Services

The 430/530 supports the following weather services: NEXRAD, graphical METAR, text-based
METAR, Wind, and Graphical Temperature/Dew Point. These services are available only in the
United States. Verify included services by displaying them on the unit, if applicable. If signal quality is
between 1 and 3, but no data is displayed, contact SiriusXM Satellite Radio to verify subscription. Be
sure that the unit is updated with the most current software.
Page 14
GDL 69/69A XM Satellite Radio Activation Procedures

Figure 4-2. Data Link Status Page

Table 4-1. Data Link Status

SAT ID Field
GDL 69/69H – 430/530 Series interface communications not yet established.
GDL 69/69H not yet communicating with internal satellite radio hardware (normal
during power-up).
'X' = Satellite radio service activated. Satellite signal quality is indicated by the
numbers 0, 1, 2, or 3; where 0=none, 1=poor, 2=good, and 3=excellent.
'-' = Satellite radio service is not activated. Satellite signal quality is indicated by
the numbers 0, 1, 2, or 3; where 0=none, 1=poor, 2=good, and 3=excellent.
Connectivity Field
No satellite is currently in view, signal quality is '0'.
Indicates a signal quality between 1 and 3.
190-00355-04
Rev. K