AlkaWay HIM-19 Gebruiksaanwijzing - Pagina 4

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} AlkaWay HIM-19. AlkaWay HIM-19 8 pagina's. Hydrogen inhaler

Pagina afdrukken

2. Using the machine for the first time

1. Remove any caps on the Hydrogen and Oxygen outlets.

Unscrew and remove the tank cap, then pour distilled

water (TDS<3) into the tank. Make sure the tank is at

least ¾ full.

3. The drain outlet is located on the back of the machine.

Position the back of the machine over a sink. Unscrew

the drain cap. Water will pour out as soon as the cap is

removed. Drain out about a third of the water. Then

replace the drain cap.

This is to ensure that the system is flushed fully. Leave

overnight to fully soak the membrane and to ensure that

the electrolytic cell is fully wet.

4. Connect the power cord and turn the power on (power

switch and cord socket is on the back of the machine). The

machine will beep and the screen will turn on.

5. Unscrew and remove the tank cap and top up the

water tank with distilled water (TDS<3). To check

the water level, use the water level observation

window on the back of the machine. Then screw the

tank cap back on.

6. If the water level is low an alarm will sound until the

water level is back above the minimum level.

3. How to use the machine (Machine operation)

1. To turn the machine on, the main power switch is located on the

back of the machine (red switch).

2. Press the

900 ml/min. For initial use, start with a lower flow rate until you get use to the hydrogen.

3. Press the

4. After setting the flow rate and the time, press the start

5. Press the

6. When the machine is working, press the

timer.

7. Once the countdown timer reaches zero the machine will beep and stop generating hydrogen.

8. When you have finished using the machine, turn it off at the power switch, (the red switch on

the back of the machine.

button to set the flow rate. Pre-set flow rates, 300, 450, 600, 750 and

button key to set the countdown clock. Pre-set times, 1,2,3,5 and 8 hours.

button to turn OFF and ON the background light and the display.

Oxygen

Outlet

button to start the machine.

button to stop the machine and reset the

Hydrogen

Outlet

Tank Cap

Tank Water

Observation

Window

Switch and

Drain

Outlet

Level

Power

Socket