Dell PowerEdge 6800 Handleiding voor probleemoplossing - Pagina 10
Blader online of download pdf Handleiding voor probleemoplossing voor {categorie_naam} Dell PowerEdge 6800. Dell PowerEdge 6800 16 pagina's. Installation and troubleshooting guide (.htm)
Pagina afdrukken2 Remove the four metal feet from the system:
Orient the system so that the metal feet hang over the edge of the table as shown in
a
Figure 1-3.
Using a #2 Phillips screwdriver or a 1/4-inch nut driver, remove the screw that secures
b
each metal foot and pull each foot from the chassis. See Figure 1-3.
Repeat this step for the other three metal feet.
Figure 1-3. Removing the Metal Feet
3 Remove the system cover and set it aside (see Figure 1-4):
Loosen the two thumbscrews on the front of the system.
a
Slide the system cover back and grasp the cover at both ends.
b
Carefully lift the cover away from the system and set it aside.
c
10
Tower-to-Rack Conversion Guide
metal feet (4)
hex-head Phillips
screws (4)